Requirements

In order to test this design on hardware, you will need the following:

• Vivado 2024.1

• Vitis 2024.1

• PetaLinux Tools 2024.1

• Linux PC or Virtual machine (for build)

• One or more Raspberry Pi Camera Module 2

• One RPi Camera FMC

• One DisplayPort monitor supporting 1080p video

• One of the supported target boards

List of supported boards

FPGA boards

Carrier board	Supported FMC connector(s)
AUBoard 15P	HPC

Zynq UltraScale+ boards

Carrier board	Supported FMC connector(s)
ZCU104	LPC
ZCU102	HPC0 HPC1
ZCU106	HPC0
PYNQ-ZU	LPC
UltraZed-EV Carrier	HPC

For list of the target designs showing the number of cameras supported, refer to the build instructions.

Supported cameras

The RPi Camera FMC is designed to support all cameras with the standard 15-pin Raspberry Pi camera interface, however these example designs currently only have the software support for the Raspberry Pi Camera Module 2.

Tip

We’re working on developing software support for more cameras. If you’d like to help with this effort, your pull requests are more than welcome.