Updating the projects
This section contains instructions for updating the reference designs. It is intended as a guide for anyone wanting to attempt updating the designs for a tools release that we do not yet support. Note that the update process is not always straight-forward and sometimes requires dealing with new issues or significant changes to the functionality of the tools and/or specific IP. Unfortunately, we cannot always provide support if you have trouble updating the designs.
Vivado projects
Download and install the Vivado release that you intend to use.
In a text editor, open the
Vivado/scripts/build.tcl
file and perform the following changes:Update the
version_required
variable value to the tools version number that you are using.Update the year in all references to
Vivado Synthesis <year>
to the tools version number that you are using. For example, if you are using tools version 2022.1, then the<year>
should be 2022.Update the year in all references to
Vivado Implementation <year>
to the tools version number that you are using. For example, if you are using tools version 2022.1, then the<year>
should be 2022.
In a text editor, open the
Vivado/scripts/xsa.tcl
file and perform the following changes:Update the
version_required
variable value to the tools version number that you are using.
Windows users only: In a text editor, open the
Vivado/build-vivado.bat
file and update the tools version number to the one you are using (eg. 2022.1).
After completing the above, you should now be able to use the build instructions to build the Vivado project. If there were no significant changes to the tools and/or IP, the build script should succeed and you will be able to open and generate a bitstream.
PetaLinux
The main procedure for updating the PetaLinux project is to update the BSP for the target platform.
The BSP files for each supported target platform are contained in the PetaLinux/bsp
directory.
Download and install the PetaLinux release that you intend to use.
Download and install the BSP for the target platform for the release that you intend to use.
For ZCU104, ZCU106, ZCU102 download the BSP from the Xilinx downloads page
For UltraZed-EV download the BSP from the Avnet downloads page
For PYNQ-ZU, there is a PetaLinux BSP maintainted in the PYNQ-ZU Git repo
Update the BSP files for the target platform in the
PetaLinux/bsp/<platform>
directory. These are the specific directories to update:<platform>/project-spec/configs/*
<platform>/project-spec/meta-user/*
The simple way to update the files is to delete theconfigs
andmeta-user
folders from the repository and copy in those folders from the more recent BSP.
Apply the required modifications to the updated BSP files. The modifications are described for each target platform in the following sections.
Add configs
This BSP modification applies to all target platforms.
Append the following lines to
project-spec/configs/config
:
# RPi Camera FMC customizations
CONFIG_SUBSYSTEM_BOOTARGS_AUTO=n
CONFIG_SUBSYSTEM_USER_CMDLINE="earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait cma=1536M"
CONFIG_SUBSYSTEM_ROOTFS_INITRD=n
CONFIG_SUBSYSTEM_ROOTFS_EXT4=y
CONFIG_SUBSYSTEM_SDROOT_DEV="/dev/mmcblk0p2"
CONFIG_SUBSYSTEM_RFS_FORMATS="tar.gz ext4 ext4.gz "
CONFIG_SUBSYSTEM_HOSTNAME="rpi-cam-fmc"
CONFIG_SUBSYSTEM_PRODUCT="rpi-cam-fmc"
Replace the last line in
project-spec/meta-user/conf/petalinuxbsp.conf
with this one:
IMAGE_BOOT_FILES:zynqmp = "BOOT.BIN boot.scr Image system.dtb"
The purpose of these configurations is to specify that the root filesystem should be on the SD card, and to set the project name. Note that this will set the project name to “rpi_cam_fmc” but you can use a more descriptive name, for example one that includes the target platform name and the tools version.
Add tools to root filesystem
This BSP modification applies to all target platforms.
Append the following lines to
project-spec/configs/rootfs_config
:
# RPi Camera FMC customizations
CONFIG_dnf=y
CONFIG_e2fsprogs-resize2fs=y
CONFIG_openssh-sftp-server=y
CONFIG_wget=y
CONFIG_parted=y
CONFIG_gawk=y
CONFIG_git=y
CONFIG_unzip=y
CONFIG_vim=y
CONFIG_zip=y
CONFIG_tcl=y
CONFIG_libmali-xlnx=y
CONFIG_mali-backend-x11=y
CONFIG_xrt-dev=y
CONFIG_zocl=y
CONFIG_opencl-clhpp-dev=y
CONFIG_opencl-headers=y
CONFIG_protobuf=y
CONFIG_libstdcPLUSPLUS=y
CONFIG_gdb=y
CONFIG_gstreamer1.0-plugins-bad=y
CONFIG_gstreamer1.0-plugins-base=y
CONFIG_gstreamer1.0-plugins-base-apps=y
CONFIG_gstreamer1.0-plugins-good=y
CONFIG_net-tools=y
CONFIG_packagegroup-core-buildessential=y
CONFIG_python3=y
CONFIG_v4l-utils=y
CONFIG_libv4l=y
CONFIG_media-ctl=y
CONFIG_valgrind=y
CONFIG_gstreamer1.0=y
CONFIG_gstreamer1.0-omx=y
CONFIG_resize-part=y
CONFIG_packagegroup-petalinux-multimedia=y
CONFIG_packagegroup-petalinux-opencv=y
CONFIG_packagegroup-petalinux-opencv-dev=y
CONFIG_packagegroup-petalinux-self-hosted=y
CONFIG_packagegroup-petalinux-v4lutils=y
CONFIG_cmake=y
CONFIG_opencv-staticdev=y
CONFIG_initcams=y
CONFIG_ADD_USERS_TO_GROUPS="petalinux:audio,video,disk,kmem;"
Append the following lines to
project-spec/meta-user/conf/user-rootfsconfig
:
# RPi Camera FMC additions
CONFIG_packagegroup-petalinux-gstreamer
CONFIG_packagegroup-petalinux-multimedia
CONFIG_packagegroup-petalinux-opencv
CONFIG_packagegroup-petalinux-x11
CONFIG_packagegroup-petalinux-v4lutils
CONFIG_cmake
CONFIG_opencv-staticdev
CONFIG_initcams
Note
Note that for the PYNQ-ZU BSP, you may have to create this file.
Add support for the cameras and NFS
This BSP modification applies to all target platforms.
Append the following lines to file
project-spec/meta-user/recipes-kernel/linux/linux-xlnx/bsp.cfg
:
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_OV5640=y
CONFIG_NFSD=y
Append the following lines to device tree file
project-spec/meta-user/recipes-bsp/device-tree/files/system-user.dtsi
:
&amba_pl {
imx219_clk: imx219_clk {
#clock-cells = <0x0>;
clock-frequency = <24000000>;
compatible = "fixed-clock";
};
imx219_vana: fixedregulator@3 {
compatible = "regulator-fixed";
regulator-name = "imx219_vana";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
};
imx219_vdig: fixedregulator@4 {
compatible = "regulator-fixed";
regulator-name = "imx219_vdig";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
imx219_vddl: fixedregulator@5 {
compatible = "regulator-fixed";
regulator-name = "imx219_vddl";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
&mipi_0_axi_iic_0 {
imx219_cam0: sensor@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&imx219_clk>;
VANA-supply = <&imx219_vana>; /* 2.8v */
VDIG-supply = <&imx219_vdig>; /* 1.8v */
VDDL-supply = <&imx219_vddl>; /* 1.2v */
port {
imx219_cam0_0: endpoint {
remote-endpoint = <&mipi_csi_inmipi_0_mipi_csi2_rx_subsyst_0>;
data-lanes = <1 2>;
link-frequencies = /bits/ 64 <456000000>;
};
};
};
};
&mipi_1_axi_iic_0 {
imx219_cam1: sensor@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&imx219_clk>;
VANA-supply = <&imx219_vana>; /* 2.8v */
VDIG-supply = <&imx219_vdig>; /* 1.8v */
VDDL-supply = <&imx219_vddl>; /* 1.2v */
port {
imx219_cam1_0: endpoint {
remote-endpoint = <&mipi_csi_inmipi_1_mipi_csi2_rx_subsyst_0>;
data-lanes = <1 2>;
link-frequencies = /bits/ 64 <456000000>;
};
};
};
};
&mipi_2_axi_iic_0 {
imx219_cam2: sensor@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&imx219_clk>;
VANA-supply = <&imx219_vana>; /* 2.8v */
VDIG-supply = <&imx219_vdig>; /* 1.8v */
VDDL-supply = <&imx219_vddl>; /* 1.2v */
port {
imx219_cam2_0: endpoint {
remote-endpoint = <&mipi_csi_inmipi_2_mipi_csi2_rx_subsyst_0>;
data-lanes = <1 2>;
link-frequencies = /bits/ 64 <456000000>;
};
};
};
};
&mipi_3_axi_iic_0 {
imx219_cam3: sensor@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&imx219_clk>;
VANA-supply = <&imx219_vana>; /* 2.8v */
VDIG-supply = <&imx219_vdig>; /* 1.8v */
VDDL-supply = <&imx219_vddl>; /* 1.2v */
port {
imx219_cam3_0: endpoint {
remote-endpoint = <&mipi_csi_inmipi_3_mipi_csi2_rx_subsyst_0>;
data-lanes = <1 2>;
link-frequencies = /bits/ 64 <456000000>;
};
};
};
};
&mipi_0_mipi_csi2_rx_subsyst_0 {
xlnx,en-active-lanes;
};
&mipi_1_mipi_csi2_rx_subsyst_0 {
xlnx,en-active-lanes;
};
&mipi_2_mipi_csi2_rx_subsyst_0 {
xlnx,en-active-lanes;
};
&mipi_3_mipi_csi2_rx_subsyst_0 {
xlnx,en-active-lanes;
};
&mipi_csi_inmipi_0_mipi_csi2_rx_subsyst_0 {
remote-endpoint = <&imx219_cam0_0>;
};
&mipi_csi_inmipi_1_mipi_csi2_rx_subsyst_0 {
remote-endpoint = <&imx219_cam1_0>;
};
&mipi_csi_inmipi_2_mipi_csi2_rx_subsyst_0 {
remote-endpoint = <&imx219_cam2_0>;
};
&mipi_csi_inmipi_3_mipi_csi2_rx_subsyst_0 {
remote-endpoint = <&imx219_cam3_0>;
};
&xx_mix_masterv_mix {
v_mixv_tpg: endpoint {
remote-endpoint = <&tpg_outv_tpg>;
};
};
&v_axi4s_remap {
remap_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
remap_port0: port@0 {
reg = <0>;
v_axi4s_remapv_mix: endpoint {
remote-endpoint = <&mixer_crtcv_mix>;
};
};
};
};
&mipi_0_v_proc {
compatible = "xlnx,v-vpss-scaler-2.2";
};
&mipi_1_v_proc {
compatible = "xlnx,v-vpss-scaler-2.2";
};
&mipi_2_v_proc {
compatible = "xlnx,v-vpss-scaler-2.2";
};
&mipi_3_v_proc {
compatible = "xlnx,v-vpss-scaler-2.2";
};
Add the initcams script
The initcams script must be added to the BSPs for all targets. This can be done by copying the following files into the BSP:
project-spec
+--- meta-user
+--- recipes-apps
+--- initcams
+--- files
| +--- init_cams
+--- .gbdinit
+--- initcams.bb
Note
These files can be copied over from one of the BSPs in the repository, but the directory structure and/or the
initcams.bb
file may need updating to work with newer versions of PetaLinux.
Mods for ZCU104
These modifications are specific to the ZCU104 BSP.
Add patch for FSBL to
project-spec/meta-user/recipes-bsp/embeddedsw/
. You will have to update this patch for the version of PetaLinux that you are using. Refer to the existing patch files in that location for guidance.
project-spec
+--- meta-user
+--- recipes-bsp
+--- embeddedsw
+--- files
| +--- zcu104_vadj_fsbl.patch
+--- fsbl-firmware_%.bbappend
Mods for ZCU106
These modifications are specific to the ZCU106 BSP.
Append the following lines to
project-spec/configs/config
. The first option prevents the removal of the PL DTB nodes that we need in this design. The second option disables the FPGA manager.
# ZCU106 configs
CONFIG_SUBSYSTEM_REMOVE_PL_DTB=n
CONFIG_SUBSYSTEM_FPGA_MANAGER=n
Mods for UltraZed EV
These modifications are specific to the UltraZed-EV BSP.
Note
When copying the UltraZed-EV BSP, you can ignore the meta-avnet
folder because we do not use it in this
design.
Append the following lines to
project-spec/configs/config
:
# UltraZed-EV configs
CONFIG_YOCTO_MACHINE_NAME="zynqmp-generic"
CONFIG_USER_LAYER_0=""
CONFIG_SUBSYSTEM_SDROOT_DEV="/dev/mmcblk1p2"
CONFIG_SUBSYSTEM_USER_CMDLINE=" earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/mmcblk1p2 rw rootwait cma=1000M"
CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_0_SELECT=n
CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_1_SELECT=y
CONFIG_SUBSYSTEM_SD_PSU_SD_0_SELECT=n
Overwrite the device tree file
project-spec/meta-user/recipes-bsp/device-tree/files/system-user.dtsi
with the one that is in the repository.
Mods for the ZCU106 design with FPGA Drive FMC support
These modifications are specific to the ZCU106 BSP that is applied to the zcu106_pcie
target design
that has support for the FPGA Drive FMC Gen4 with a single M.2 PCIe device on the HPC1 connector.
Append the following lines to
project-spec/configs/rootfs_config
:
# Tools for FPGA Drive FMC
CONFIG_e2fsprogs=y
CONFIG_e2fsprogs-mke2fs=y
CONFIG_e2fsprogs-badblocks=y
CONFIG_mtd-utils=y
CONFIG_util-linux=y
CONFIG_util-linux-mount=y
CONFIG_util-linux-mkfs=y
CONFIG_util-linux-blkid=y
CONFIG_util-linux-fdisk=y
CONFIG_pciutils=y
CONFIG_bridge-utils=y
# Add coreutils for full version of dd, and nvme-cli for NVMe tools
CONFIG_coreutils=y
CONFIG_nvme-cli=y
Append the following lines to
project-spec/meta-user/conf/user-rootfsconfig
:
# FPGA Drive FMC additions
CONFIG_e2fsprogs
CONFIG_e2fsprogs-mke2fs
CONFIG_e2fsprogs-badblocks
CONFIG_mtd-utils
CONFIG_util-linux
CONFIG_util-linux-mount
CONFIG_util-linux-mkfs
CONFIG_util-linux-blkid
CONFIG_util-linux-fdisk
CONFIG_pciutils
CONFIG_bridge-utils
CONFIG_nvme-cli
Append the following lines to file
project-spec/meta-user/recipes-kernel/linux/linux-xlnx/bsp.cfg
:
# FPGA Drive FMC configs
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCIE_XDMA_PL=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_TARGET=y